Zverse adding to capabilities with new product offerings see more
Columbia-based digital manufacturing solutions company ZVerse Inc. has launched new technology that creates 3D computer-aided design files from 2D technical drawings, cutting some project times by as much as half.
The automation-assisted conversion generates a rapid 3D conversion project quote, then creates 3D manufacturing files that can be stored in a digital library, allowing field and repair technicians to quickly access the files and manufacture parts from anywhere, according to a news release from ZVerse.
“ZVerse has been doing this work for years, converting 2D files to 3D through our on-demand design services,” company president David Craig said in the release. “We know the areas where you can drive automation and drive the biggest impact in workflow. We have also learned that the greatest time spent in the conversion process can be automated and we now have automated those steps. We are committed to driving even more types of automation in and around this critical business need.”
Project times can be reduced by an average of 35% to 50% with the elimination of the need to re-draw part geometries at current manufacturing software standards, the company said.
The advancement will address the lack of 3D digital files that is an obstacle to digital manufacturing and on-demand maintenance, repair and overhaul part production at scale, according to the release. Manufacturing engineers and industrial designer can more quickly convert legacy files, resulting in time and cost savings while improving geometric accuracy.
The service will also reduce equipment downtime, reduce production costs and allow ZVerse customers to carry less inventory, the company said.
Founded in 2013, ZVerse shot to national prominence last year with the development of its ZShield Flex face shield, which was named an Innovation by Design Awards winner by business magazine Fast Company.
Ahead of Spring Break, Makers of ZShield Product Line Offer Easy Way to Stay Safe, Avoid Coronavirus see more
Digital manufacturing company ZVerse, Inc., makers of the award winning ZShield line of face shield and face mask products, has launched a public service campaign aimed at promoting the best way to stay protected against the COVID-19 virus.
As Spring Break approaches and coronavirus cases remain high across the U.S., ZVerse is recommending a "Good-Better-Best" model for wearing Personal Protective Equipment (PPE) based on public health guidelines and customer feedback.
ZVerse is recommending a “Good-Better-Best” model for wearing Personal Protective Equipment (PPE) based on public health guidelines and customer feedback.
The simple model recommends wearing a face mask as a minimum, or good level of protection, followed by a face mask and a face shield combined for better protection. The best protection comes with wearing a filtered face mask combined with a face shield, according to the ZVerse model.
"Experts are warning of a new pandemic wave if people let down their guard during the upcoming Easter and Spring Break holidays and fail to protect themselves and their loved ones," said ZVerse Founder & CEO John Carrington. "At ZVerse, we have learned so much from our own customers and our own product development journey about how to stay safe. So, we created what we hope is a simple and easy guide for COVID-19 protection."
In addition to raising public awareness, ZVerse is recommending its model to city and state officials looking for an easy way to keep citizens safe.
"ZVerse has been a valuable member of South Carolina's business community for many years, and they really stepped up when they received the call to help combat the COVID-19 pandemic," said Columbia Mayor Steve Benjamin. "Their "Good-Better-Best" model is exactly what we need to not only further the decline of COVID-19 cases, but also build toward a return to normalcy where we work, learn and play in our local communities."
ZVerse designs, manufactures and sells a complete line of acclaimed PPE products popular with consumers, schools, employers and government entities - and often seen covering famous faces across Hollywood
For information about ZShield products and pricing, visit: https://zshield.com/collections/available-products.
ZVerse was founded in 2013 by John Carrington in Columbia SC. ZVerse, a digital manufacturing ecosystem, currently provides the only CAD as a Service (CADaaS) platform and designer marketplace. ZVerse recently launched the next generation of its Digital Manufacturing Enablement (DME) platform, an AI drive workflow solution - a category defining technology for digital manufacturing and OEMs. In 2020, in response to the COVID-19 pandemic, ZVerse adapted its business model to quickly produce and distribute its new personal protective equipment product, ZShield, to hundreds of thousands of citizens. To learn more visit zverse.com and zshield.com.
Companies find ways to thrive despite pandemic see more
Seven months ago, John Carrington took a deep breath and pushed all his chips to the center of the table.
His Columbia company, ZVerse, was at a crossroads. Founded in 2013 as a 3D design and software solutions provider, the Shop Road outfit faced overwhelming demand for the protective face shield that had grown from an idea hatched to help local hospitals into orders multiplying into the millions.
“The first request we had was for 3,000 units, which we could solve, no problem,” Carrington said. “The next day it was 10,000, and the next day it was 50,000, and at that point we knew that 3D printing would not be able to keep up with that demand. … We had to place a bet.”
The wager involved shutting down for a few weeks to completely retool ZVerse’s production process to injection molding while scaling up from an 8,000-square-foot facility to a 30,000-square-foot one that could fill three tractor-trailers a day. Continue reading by clicking here...
Zverse steps up for South Carolina see more
John Carrington remembers the chaos from the spreading coronavirus reaching his small Columbia, S.C., company about Saturday, March 14, three days after the World Health Organization declared Covid-19 a pandemic.
It started with a phone call from a hospital executive that Saturday saying the hospital was running critically short of personal protective equipment (PPE), ventilator parts, and ventilators altogether. “What can you do?,” the hospital executive asked.
The Zverse CEO recalled that the executive “was pretty urgent,” and the gist of the message was open-ended: “We need a lot of problems solved and fast, and how can you help?”
How indeed? Carrington couldn’t offer the hospital a catalog of PPE, or a catalog of anything.
His workers were specialists in being manufacturing enablers, providing software and a cadre of experts who linked customers with ideas with manufacturing partners to convert those ideas into objects as quickly and efficiently as possible.
Within days, the company would shift into designing its own face shields for use in hospitals, later designing other models for schools or other crowded spaces.
Zverse would go from being able to make 1,000 face shields a day using 3-D printers to making the heavy investments to build molds for injection molding that allowed its production rate to climb to 120,000 units per day within about a month. That process would typically take about two or three months.
In March, Zverse had 20 employees. By September, it had 80. It expects to end the year with 100 to 120 employees — more designers, product managers, account managers, customer service and support, shipping and logistics specialists.
“It’s been a wild ride,” Carrington said.
Zverse is just one of hundreds of South Carolina businesses that were called to action by the pandemic and responded with innovations to help their customers and communities in a time of need. Several of those companies in the biotech field were highlighted in an Aug. 25 webinar by SCBIO, a not-for-profit industry association promoting the life sciences in South Carolina.
The others were:
VitaLink Research, a clinical research site network based in Greenville. VitaLink was commissioned by Moderna to conduct its Covid-19 vaccine study in South Carolina.
Vikor Scientific LLC, a Charleston testing laboratory founded in May 2018 by physician and entrepreneur Shea Harrelson and medical entrepreneur Scotty Branch. Its lab is accredited by the Centers for Medicare and Medicaid Services under its Clinical Laboratory Improvement Amendments (CLIA) certification. They have dedicated 2,000 square feet of its new 22,000-square-foot facility to Covid-19 testing. In late August it was testing about 10,000 Covid-19 swabs per day, and had the capacity to test for 20,000 per day.
Nephron Pharmaceuticals Corp., a West Columbia manufacturer of medical products and a leading producer of medical products packaged into single doses using blow-fill seal technology. It is creating space at its Lexington County plant to manufacture vaccine doses when they become available. Since the pandemic, it has created a CLIA-certified lab for Covid-19 testing, and has a mobile lab that visits the University of South Carolina and several area employers.
Modjoul Inc., founded in Clemson in 2016 by Eric Martinez, CEO, and Jen Thorson, COO. Modjoul sells a platform designed to enhance worker safety by having them wear a device called a SmartBelt that tracks their movements. Linked software identifies movements that might be dangerous — from certain bending movements to overly fast cornering with a forklift. With Covid-19, it is enabling employers to use the devices to screen body temperatures and signal workers with a vibration if they are violating social distancing. In the event of an outbreak, the data can be used for rapid contact tracing.
“When you think about it, you’re able to reduce the amount of time businesses are shut down because you know who people have been in contact with,” Thorson said. “It’s one of those happy coincidences that we’re able to use our existing device, not only for safety, but also for that illness, contact tracing and social distancing.”
Thorson said her biggest lesson from the pandemic has been “don’t be afraid to pivot quickly.”
“We have a team of really smart people, and we can figure out almost any problem,” she said.
At Nephron Pharmaceuticals in Lexington County, one of their biggest lines is generic inhalation solutions and suspension products, including those used to treat severe respiratory distress symptoms associated with Covid-19.
The company has grown from 75 employees with two products in 2001 to about 80 products and about 1,100 full-time employees, in addition to 900 part-time workers, interns and apprentices. It announced an expansion this year that will expand its buildings to cover 1 million square feet by early 2021. It expects to add 380 more full-time employees by 2024, and much of the hiring is now underway.
“We want them to be trained and ready as the new buildings come online,” CEO Lou Kennedy said.
About 110,000 square feet of its expansion is for manufacturing vaccine doses, antibiotics or other chemo-therapeutic agents. Nephron Pharmaceuticals is one of seven U.S. companies identified by the federal government as key to getting a vaccine produced — once one has been developed.
“We know we’re going to need a heck of a lot of vaccines all at once if we’re going to get everybody healthy,” she said. “We are doing anything we can within our bandwidth to be patriotic Americans and help with the eradication of Covid-19.”
The New York Times first reported Jan. 8 on the emergence of a novel coronavirus in China’s Wuhan province. Two days later, China reported its first death from the virus.
The first case in the United States was confirmed Jan. 21.
On Feb. 11, the World Health Organization named the disease Covid-19.
By Feb. 26 there were 60 known cases in the United States, and Dr. Nancy Messonnier, director of the CDC’s National Center for Immunization and Respiratory Diseases, asked the American public to brace itself for a global pandemic.
That day President Trump said infections were “going very substantially down,” and that “we’re going to be pretty soon at only five people.”
Just two weeks later, when Covid-19 was declared a global pandemic, there were at least 1,240 people in 42 states and Washington, D.C., who had tested positive for Covid-19, and 37 had died.
Meanwhile, a wave of change was rolling toward Carrington’s 7-year-old company on Shop Road, named for its location by Columbia’s Norfolk-Southern railroad repair shops and better known for parking for UofSC football games.
His children were home from school, many offices were closing and employees were working from home — if at all.
“It was interesting,” he said. “We were not sure what this meant for us, let alone as a business, because a lot of our manufacturing customers’ factories shut down as well.”
After the weekend call from the hospital executive, Carrington tried to solve its first problem: The hospital needed fully protective face shields that could be worn in the intensive care unit, or other areas with dense aerosols.
“Literally overnight, we went from concept to prototype, rapid prototyping, multiple iterations,” Carrington said. “They were asking for 3,000 units, which was no problem. And they needed them immediately.”
The next day, Zverse got a call from a government agency that needed 10,000 face shields. And on the third day, another hospital system called needing 50,000 shields.
The second hospital system needed face shields that could be sterilized and reused because they were going through disposables at a rate of 5,000 per day for just one of its hospitals.
While 3-D printers are splendid devices for fast turnaround and multiple design changes, they are not designed for a lot of volume.
And 50,000 units is what Carrington defined as “a lot of volume.”
So, it was decision time.
More calls were coming in. “Once the word got out to a few people, we started getting direct messages from doctors, family members of nurses, who were all pleading for help, because there was no PPP at all,” Carrington said.
The mulling was not a long process. The company simply wouldn’t be able to keep up with demand using 3-D printers.
So after the call for 50,000 units, Carrington decided to move from the 3-D printing underway to injection molding, “which was a significant step, because it was a real capital investment during a time when everything was very uncertain.”
But he knew it would also allow Zverse to ramp up much more dramatically, “help a lot more people, help the company and give us a little bit more security.”
The actual injection molding would be done by outside manufacturers, but Zverse had to supply them with the molds.
According to Rex Plastics of Vancouver, Wash., an injection mold can cost $1,000 to $80,000 depending on size and complexity. A typical mold costs $12,000.
Zverse dealt with the issue by requiring its customers to pay half the cost up front. Hospitals typically pay net 30, or 30 days after invoice, but they quickly agreed. “These are different times,” Carrington said.
“We were able to get the first 5,000 units coming out of the first mold within about two weeks.”
In all, Zverse built about 24 tools for injection molding.
Carrington credited much of the company’s success to its network of manufacturers.
“We had all the right people in our ecosystem to accomplish all this.
“We sit in the middle of a lot of manufacturing capabilities. That’s what we’ve done forever,” he said. “This is the first time we took a product of our own and went to market with it.”
After injection molding was in place, Zverse spread the word that it had the capacity to make 100,000 units a day — mass manufacturing.
“We got flooded with orders from every hospital, every government agency you can imagine,” he said. “It was completely overwhelming.”
Carrington started calling his shareholders and others in his support network to solve emerging problems, like transportation logistics.
“That whole period was insane for everyone involved,” he said. “But it was super fulfilling.”
One of Zverse’s biggest contracts was for the U.S. Department of Veterans Affairs for 2 million face shields. At the time, there were reports about suppliers not being able to deliver equipment and PPE to the VA.
But Zverse supplied the order from April through June.
“That was a herculean effort to be able to deliver that on time,” he said. “The VA said we were one of the best suppliers that they had.”
In all, Zverse supplied 3 million of its health model ZShields over 75 days.
As businesses began trying to reopen in May, there was a broad need for some forms of barriers and PPE —a need that is likely to last beyond the pandemic.
Some restaurants called for the face shields Zverse was delivering to hospitals.
“I looked at them and said if I walked into a restaurant and saw someone wearing this, I wouldn’t want to eat there. That’s going to be bad for business,” he said.
Instead, Zverse designed ZShield Plex —something that would be a comfortable and effective barrier from transferring droplets from your mouth. The shield attaches at the neck and can flip down when on break or away from where needed.
“That one captured everyone’s attention,” he said.
Zverse started taking pre-orders for the shield in May from businesses, schools and others, and has since shipped millions.
Carrington said Zverse was able to make its huge pivot to meet the demands of the pandemic moment with “brute force and an incredible team.”
“The core group that’s been here since March has been averaging like 16-hour days since March, including weekends,” he said. “Everyone is driven by the fact that we’re able to produce something that is able to solve problems.
“Right now the world needs a lot of problems solved,” Carrington said.
“I don’t think there’s been a time in history when the world has needed as much innovation in one moment as it does right now.”
Zverse honored in national competition see more
Columbia-based digital manufacturing company ZVerse has won a national design award for its ZShield Flex.
The ZShield, designed and manufactured by Columbia-based ZVerse, has won a national design award for innovation. (Photo/Provided)
The face shield, designed and produced by ZVerse, has been named an Innovation by Design Awards winner by business magazine Fast Company. The awards, in their ninth year, recognize creative, problem-solving innovations and have included winners such as Spotify, Google and Disney+.
The shields feature lightweight visors that clip around the wearer’s neck, making the shield comfortable for all-day wear. ZVerse’s computer assisted design platform creates custom, manufacturable 3D files that are returned to clients for production, enabling an invention to quicky go from idea to reality.
“We need innovative design more than ever, and the 2020 honorees have brought creativity, inventiveness, and humanity to address some of the world's most pressing problems, including the global pandemic, racial injustice, and economic inequality,” Stephanie Mehta, editor-in-chief of Fast Company, said in a news release. “Together these entries offer a glimpse into a future that is more inclusive, more accessible, and more just.”
The ZShield Flex won in the Workplace category and also received an honorable mention in the Best Design of North America category alongside companies such as Microsoft, Google and Logitech. A complete list of winners, finalists, and honorable mentions are featured online and in the October-November issue of Fast Company, on newsstands Oct. 20.
In March, ZVerse founder and CEO John Carrington adapted the company’s business model to accelerate the mass production of face shields in response to a health care community struggling to deal with the COVID-19 health crisis. The company tested more than a dozen designs before settling on the ZShield, focused initially on the needs of health care workers before being adapted in partnership with industrial designer Scott Henderson for everyday use.
“At the onset of the pandemic, we recognized our unique role in the world as great enablers of digital manufacturing, and we pivoted to become one of the largest producers of face shields to serve our country’s urgent need for PPE,” Carrington said in the release. “After launching with ZShield Health, we brought on Scott Henderson to reimagine the traditional face shield design and create a product that would be comfortable for a variety of work environments as well as everyday life. Going to market with such a novel design and seeing it in use by so many people and industries has been a humbling experience. We’re honored to be recognized by Fast Company for our work; it’s truly been a labor of love.”
To date, ZVerse has produced more than four million shields, nearly tripling its workforce. Notable users include television and film production companies, Disney, Chick-fil-A, Four Seasons Hotels and Resorts, and Walgreens, according to the release.
“When ZVerse originally contacted me about collaborating, I immediately realized how historic this moment was and felt an urgent need to help with the project,” Henderson said. “Prior to COVID-19, face shields weren't considered an essential accessory outside of the healthcare and medical science industry. After a century of little innovation in regard to face shield design, I am so proud of our team for applying out-of-the-box critical thinking to create this new option for PPE.”
Webinar features inside details on beating back the COVID pandemic see more
Top executives from five of the Palmetto State’s leading life sciences organizations shared how they have found opportunity by pivoting, product adjustment, service expansion and partnering to overcome the global COVID pandemic and find accelerating opportunity and growth.
The SCBIO webinar took place August 25th and featured Shea Harrelson and Scotty Branch, co-Founders of Vikor Scientific; John Carrington, CEO of Zverse; Jen Thorson, COO of Modjoul; Steve Clemons, CEO of VitaLink Research; and Lou Kennedy, CEO of Nephron Pharmaceuticals. Erin Ford EVP of SCBIO – South Carolina’s official life sciences industry organization -- moderated. Enjoy the whole program here.